First of all, inform the customer immediately and conduct adequate coordination and communication. Once a product is manufactured and printed with the customer's specific intent, it cannot be resold to others, and there are only two outcomes: scrap it or the customer will accept it. Both sides of modern enterprise supply and demand are in line with the purpose of win-win, if sufficient communication, coupled with some remedial measures, may avoid a certain loss, but this is not advocated.
The main remedial measures are:
1. Alter the arrangement, layout and way of the contents;
2. if the size is slightly larger, the padding plate or spacer should be added properly for filling;
3. if the size is slightly smaller, flatten the corrugated properly.
(Note: This is highly dangerous and must not be done for cartons requiring strict compression index. The additional size is also extremely limited.)
As the saying goes: tall carpenter, short blacksmith, the principle of making a carton is better than tiny. But as long as we do master the theory, scientific design, strict implementation of the process, then, why don't we do simple things right at once?
The influence of carton manufacturing process on size
Quality products are produced, not tested out, therefore, strict implementation of excellent technology, is the premise to ensure product quality. The quality awareness of personnel is a key factor.
The Carton forming process mainly includes: assembly line, longitudinal cutting line, post-press slotting line, die cutting, manual touch line, etc. Manual wire touching can only be seen in smaller third-level factories. The quality of wire touching has a considerable relationship with the proficiency of the operator, the rest of the molding methods are relatively accurate, and the shift error is not huge, especially now a lot of computer control, as long as the staff sincerely treat, the size input is correct, the probability of problems is extremely tiny.
How to remedy the size discrepancy? Ask the custom corrugated box supplier to tell you.
Whoever is not afraid of ten thousand is afraid of one case, no matter what link appears the problem, reflected in the product, is a serious disqualification. What if something goes wrong?
First of all, inform the customer immediately and conduct adequate coordination and communication. Once a product is manufactured and printed with the customer's specific intent, it cannot be resold to others, and there are only two outcomes: scrap it or the customer will accept it. Both sides of modern enterprise supply and demand are in line with the purpose of win-win, if sufficient communication, coupled with some remedial measures, may avoid a certain loss, but this is not advocated.
The main remedial measures are:
1. Alter the arrangement, layout and way of the contents;
2. if the size is slightly larger, the padding plate or spacer should be added properly for filling;
3. if the size is slightly smaller, flatten the corrugated properly.
(Note: This is highly dangerous and must not be done for cartons requiring strict compression index. The additional size is also extremely limited.)
As the saying goes: tall carpenter, short blacksmith, the principle of making a carton is better than tiny. But as long as we do master the theory, scientific design, strict implementation of the process, then, why don't we do simple things right at once?
First of all, inform the customer immediately and conduct adequate coordination and communication. Once a product is manufactured and printed with the customer's specific intent, it cannot be resold to others, and there are only two outcomes: scrap it or the customer will accept it. Both sides of modern enterprise supply and demand are in line with the purpose of win-win, if sufficient communication, coupled with some remedial measures, may avoid a certain loss, but this is not advocated.
The main remedial measures are:
1. Alter the arrangement, layout and way of the contents;
2. if the size is slightly larger, the padding plate or spacer should be added properly for filling;
3. if the size is slightly smaller, flatten the corrugated properly.
(Note: This is highly dangerous and must not be done for cartons requiring strict compression index. The additional size is also extremely limited.)
As the saying goes: tall carpenter, short blacksmith, the principle of making a carton is better than tiny. But as long as we do master the theory, scientific design, strict implementation of the process, then, why don't we do simple things right at once?